| |
|
250/280 Softail
style frame for Big Twin
Frames used in these kits are the same as used in Zodiacs TUV
approved Wide-Tail frame kits, but added a swing-arm wide enough to
accept Avon’s Super wide 230 tire and still be able to use the stock
final belt drive. This tire, that measures 250 mm wide on an 8”
wide rim, will go straight in the swing arm. When using the 2000 to
present 1 1/8” wide final belt drive you can even mount Avon’s
latest trick 250 tire on a 9” wide rim. When a chain is used you
can easily go up to 300 mm wide tires.
These
frame and swingarm combinations handle very well and withstand the
most severe stress, vibration and fatigue tests.
|
|
 |
It is
also normal practice that the engine and transmission combination
fits in the frame without grinding, drilling or any other
modification. The steering head is raked to 38 degrees, this
requires a 4” to 8” overstock fork depending on the wheel and tire
size used. All mounts for side stand and forward controls are
welded in place. Frames are fully Tig-Welded for superior
strength. Due to the variety of custom made wheels, axle spacers
are not included. For those that want to space out the drive
pulley, an outside belt support is available. Frame kits come
complete with frame, swingarm, primary spacer ring, offset
transmission mounting plate, stainless swingarm pivot bolt with
chrome spacer and bearing kit, chrome rear wheel axle and stainless
steel protection plates for swingarm, engine and shocks. All parts
are separately available. Fender struts, 25 mm extended sprocket
shaft extension, and 25 mm extended sprocket shaft nut must be
ordered separately.
Z236442
Complete Super-Ass frame kit, TUV approved
 |
Replacement kit parts
Z238761 Frame only
Z236687 Swingarm only
Z237653 Stainless pivot bolt with chrome spacers
Z237274 Swingarm bearing kit (set of 2)
Z236432 Rear axle with washers and nut, chrome (395
mm)
Z238763 Stainless swingarm plate
Z238764 Engine protection plate
Z238765 Shock protection plate
Z236491 Inner primary to motor spacer with hardware
Z236490 Transmission offset plate
Optional Parts
Z236495 Belt pulley
support bearing plate with hardware
Z236444 Fender struts raw steel
Z346210 Crankshaft extension
Z346212 Motor sprocket shaft nut 1986 thru 1990
Z346214 Motor sprocket shaft nut 1991 to present
Note: Zodiac
Wide Tail frames with a different rake are available on special
order.
|
|
|
